Ripstop Sand Color Spandex Stretch Fabric

Cotton 32% / Polyester 65% / Spandex 3%, 244gsm, Ripstop, Sand color, Spandex Stretch Fabric

(customer review )

Model: DK-SF-004

Material: Cotton 32% / Polyester 65% / Spandex 3%

Construction: 16*16 + 105D

Weaving Style: Ripstop

Weight: 244gsm

Width: 148cm

Finish: Spandex Stretch / With TEFLON Label / With LYCRA Label

Application: Workwear / Uniform

Minimum Order Quantity

10000 Meter

Cotton fiber

Cotton fiber has high strength, good air permeability, good heat resistance, soft and comfortable hand feeling. But it poor on wrinkle resistance and breaking. Compared with polyester fiber dyeing process, cotton fiber is easier to fade color.

Polyester fiber

Polyester fiber has advantages of high strength, high elasticity, good in shape retention and heat resistance. It has become the most widely used and largest consumption fiber. However, when polyester fiber encounter fire, it will burn, melt and drip on the skin to cause secondary harm, so it seldom uses in high-temperature and high-heat work areas’ workwear fabric.

Spandex fiber

Spandex fiber is also called polyurethane (PU) fiber. It usually consists of multiple filaments. When producing Spandex fiber, the tension on the roll, the number of counts on the tube, the breaking strength, the breaking elongation, the degree of forming, and the amount of oil adhesion, Elastic recovery rate…etc., these issues directly affect to the spinning. It breaking strength is the lowest among of all fibers. Generally, it is not used alone, but a small amount is incorporated into the fabric. Knitted fabrics are more commonly used. Woven fabrics are generally used for tactical pants fabric.

Ripstop

Ripstop is one of the woven fabrics’ weaving style, using a special reinforcing technique that makes fabric have better breaking strength and tearing strength. During weaving, thick reinforcement yarns are interwoven at regular intervals in a crosshatch pattern. Advantages of ripstop are the strength-to-weight ratio and that small tears can’t easily spread. Fibers used to make ripstop include cotton, polyester, nylon.

Waterproof

Waterproof refers to that water can’t penetrate through the fabric back side in specific pressure. Generally, it will coat PU or PVC coating on the chemical fabric backside to make the waterproof function. Some fabric will laminate Polytetrafluoroethylene (PTFE) membrance to make it waterproof. This function usually don’t invalid by washing and long-tetm use.

TEFLON

TEFLON treatment is through the addition of auxiliaries to make fabric has a low surface tension. Due to the low surface tension has non-stick characteristics, so TEFLON fabric has three-resistant function: water resistant, oil resistant, and soil resistant. However, the TEFLON function is not permanent, it’s will gradually lose its effect as the number of washing increases.